Eurogruas
Ericssons
R.F.O10
QUICK AND SIMPLE
R.F.O10 is designed for chassis with a total weight of 3500kg. The advantage of the R.F.O10 is its quick and easy use in all situations for transporting and moving parked and damaged cars. All functions can be controlled via a control panel in the cab using the reversing camera.
The grill can rotate 90° so it can work at the right angles to easily move the parked or damaged car. The automatic grill opens and closes hydraulically and can be pushed out and in without you having to get out of the vehicle.
The cabinets at the back of the building are made of fiberglass. The spaces are intended for dollys and equipment.
Homologized self-adjusting rear air suspension and reinforced springs, control the rear weight and distribute the weight correctly between front axle and rear axle on the road while driving.
R.F.O10
- Lifting capacity
- 500-800 kg
- Lifting height approx.
- 0.4m or 0.5m
RF.O10 is a garage tow truck primarily intended for light barbecue towing and quick and smooth transport. It is built entirely according to the requirements of Scandinavian and European salvagers. The customer category for this construction is those who are primarily in need of a slightly smaller construction and where economy, flexibility and speed are characteristics.
CHASSIS
The chassis below applies at the moment. (Contact BRO about which chassis apply)
NISSAN NAVARA D.C. 4x2 + 4x4 - NEW - E6 - 2.4 CDI - 190 hp
| TOTAL WEIGHT 3.5 T | tires - 265/70R16 115R |
| Total weight with superstructure: | 3500 Kg. |
AIR BAG, cruise control, AC, Central locking, Stereo/CD, buttons on the steering wheel. rear fog lights, headlight adjustment, manual gearbox.
| Chassis | homologation for 3.5 TON. |
| Original chassis | NOT HIPPED! |
Registered in Italy for export to another EU country!
VW AMAROK 3.0. BTDI HL TIP. 8M 4X4 permanent four-wheel drive 150 kW
| TOTAL WEIGHT 3.5 T | tires - 265/70R16 115R |
| Total weight with superstructure: | 3500 Kg. |
Aluminum rims, Xenon headlights, Fog lights, Adaptive headlights, Chrome trims, Reverse warning lights, Automatic transmission
| Chassis | homologation for 3.5 TON. |
| Original chassis | NOT HIPPED! |
Registered in Italy for export to another EU country!
| Width | 2.45m |
| Length at wheelbase | 4.4m about 6.0 m |
HELP
The rescue barge is made of high-strength steel, which is painted for corrosion resistance. The superstructure is mounted on the chassis according to the manufacturer's instructions.
LIFTING UNIT
The lifting unit is made of high-strength steel that is hot-dip galvanized for corrosion resistance. It has single-extension with a reach of 1.3 m. Lifting capacity in the outer position is 1,500 kg. It is operated hydraulically from the cab or rear cabinet. Can also be controlled via the remote control. Integrated passenger car halves and 50 mm bullet included.
THE STORAGE AREA
- The standard includes fiberglass cabinets on the left and right side
- Radio control
- TOUCH SCREEN that can be operated inside the cabin
- Backup camera 1pc
- Dolly heavy duty ( 1 pair )
- MC holder, 1pc
- Towing ball mounted behind 1 pc
WINCHES
- Hydraulic winch VIME 1500, 1.5 ton permanently mounted on the boom
- Electric winch WARN 3.0 ton mounted in the front under the bumper
ELECTRICAL SYSTEM
All electrical cables are protected against external damage according to protection standards. This means that the electrical cables are provided with a protective cover similar to the chassis manufacturers' design. The electrical system is connected via fuses and relays which are located in the right cabinet. Two side marker lights on each side and electric emergency stop.
- Light arc in LED mounted on the targan
- Work light LED on targan, 2pcs
- Flash lights front and back, 2+2
- Double LED rear lights (2 at the bottom and 1 at the top per side)
HYDRAULIC SYSTEM
- Electro-hydraulics for operating the lifting boom and grill (new system)
- Main boom with hydraulic lift
- Hydraulic opening and closing of grill, so-called "Quick-Pick"
RADIO
All functions are controlled via remote radio
OTHER
- CE marking
- Weighing and inspection in Sweden
Scandinavian agency
Bro Bärgningsbyggen AB has the agency for an Italian construction in Scandinavia and together with them we develop light flatbed carriers so that they are adapted to Scandinavian weather and working methods.
Contact us
Would you like more information or the opportunity to visit our factory? Do not hesitate to contact us.
Pontus Mörth, CEO
LATEST DELIVERIES
R.F.O10
Equipment
Spare parts COMEAR
Flatbed roll
Grill bolt Comear
Wire window
Wire window
Sliding plate for tipping frame
Grill bolt
Flatbed shock absorbers
Roll
Grill holder
Capstan roller
Wheel support
Wheel support Comear 2.5t personal grill
