BB 108

Lifting capacity

8 tons

Lifting height approx.

1.3 m

Flat load capacity

10 tons

CHASSIS

Suitable chassis should have a total weight of 16-20 tons, wheelbase 5.0 m, air suspension front and rear, low-profile tires for better load angle and power take-off for direct-mounted pump. Gear ratio approx. 1:1.3.

FLAKES

BB 9136

The flat construction is straight. Sliding profile and flat surface are made of extra high-strength steel. The edge profile is stainless steel to prevent corrosion around the lashing holes. The bed can be hydraulically removed and pushed to facilitate loading and unloading of vehicles.

• Width 2.5 m
• Length at wheelbase 5.0 m and short cab approx. 6.1 m
• The sheet is moved with a hydraulic cylinder
• The tipping function takes place automatically via overflow valves
• Attachment points for tire tensioners along the flat sides
• Three sockets for breaker roller in the rear edge of the bed
• Support rollers in the rear edge of the flatbed
• Front stem according to TSV standard. Separate article number for front stem: BB9126
• Plastic steps and handles on both sides at the front trunk

AUXILIARY FRAME AND TIPPING FRAME

The auxiliary frame of the recovery unit is made of square profile. The tipping frame is equipped with exchangeable sliding plates. The superstructure is mounted on the chassis according to the truck manufacturer's instructions.

LIFTING UNIT

BB 9141

The unit is made of extra high-strength steel and is operated hydraulically from a control cabinet. It is fitted with two separately operated telescopic outriggers with pilot operated non-return valves. The support legs are widely spaced and equipped with a toothed ground plate. Dual lift cylinders with over-center valves.

BB 9144

Powerful folding boom cylinder with a tilt force equivalent to 1,200 kg in the grill (innermost position). The recovery arm can be locked in three positions. Total extension length 600 mm. Hard-to-reach lubrication points are moved to a more service-friendly location.

BB 9153

Comprising parts are sandblasted, primed and finished all around for maximum rust protection. The extension parts and the lifting yoke are chromated.

BB 9116

After painting, the parts are reassembled on the chassis.

STORAGE SPACE

BB 9166

The cabinets are made of 3 mm cold-rolled stainless steel and have at least four separate compartments, one of which is for the control valve. The cabinets are lockable, have interior lighting and are prepared for the standard tools included in the construction. Interior and tool holder are made of stainless steel. The doors are made of stainless steel, rubber-sealed and have red reflectors on the inside

BB 9011

All locks are stainless and have key caps.

WINDSCREEN

Flat winch

BB 9119

A planetary gear winch with a traction force of 6.0 tons is mounted on the flatbed. Break rollers near the lint drum. The line drum is pneumatically disengageable. The diameter of the rope is 13 mm and the length 30 m with a breaking load of 11,900 kp.

Frame winch

BB 9118

The second winch with a pulling force of 10 tons is mounted in the chassis frame. Breaker rollers in the rear edge of the unit. The line drum is pneumatically disengageable. The diameter of the rope is 16 mm and the length 30 m with a breaking load of 16,400 kp.

ELECTRICAL SYSTEM

BB 9115

All electrical cables are protected against external influences according to protection standard IP50 (DIN40050). The electrical system is connected via fuses and relays which are placed in the cab. Original switch for the superstructure in the cab. The unit is equipped with an hour counter that indicates the time of use of the unit. The disengagement of the winches only works with the power take-off switched on. Side marker lights as required by law.

Back part

• Two rear lights, recessed
• Two reflectors
• Two position lights, Pro Superpoint "rubber mallet". Art no: 24162
• Two work lights, recessed. Art no: 26163
• A 15-pin trailer connector incl. 12/24 volt adapter
• License plate with lighting left rear. Art no: 24620

Front stem

• Four working lights. Art no: 26163
• Two red position lights highest point forward stem. Pro Slim. Art no: 24152
• 6 hooks for chain

BB 9069

A light sign LED, 2340 mm wide, is mounted on the front stem.

Art no: 21287

HYDRAULIC SYSTEM

BB 9150

• Hydraulic tank, volume approx. 75 l
• Hydraulic pipes, electrolytically galvanized DIN 2391/C
• Suction and return hose with embedded steel spiral SAE 100/R4
• High-pressure hoses with pressed couplings and two steel inserts SAE 100/2RL-R9R
• High pressure filter 10 Hm
• Return filter 10 Hm

BB 9021

• Hydraulic pump of axial piston type with emergency stop function max 400 bar

BB 9029

• The control unit Danfoss PVG32 with nine parallel-connected sections, built-in shock valves and main overflow valve
• The operating levers are spring centered
• Glycerine dampened manometer
• Mineral oil

BB 9128

Valve console (with control unit) is mounted as standard on the right side in the rear cabinet space.

Maneuvering

• Main winch in/out
• Flat in/out
• Tilt up/down
• Lift boom up/down
• Vikbom working and transport mode
• Eject boom in/out
• Left support leg up/down
• Right support leg up/down
• Frame winch in/out

STANDARD EQUIPMENT

BB 9168

The following tools and accessories are included in the standard equipment kit

A pair of stop blocks, adjustable and lockable, galvanized	BB4000
Starting socket, 24 volts with starting cables 7m incl. extension cable 10m	6.00945.410
12 volt starter booster with charge	B-BG150
Towing hitch with three pins and 50/60 tow ball, chromed	BB3529R
Four pairs of claws	4.04.0010, 3.04.0009, 4.04.0604, 4.04.0383
Air winding, 3/8”	BB9080
Tire tensioners, 6 pcs.	M144302
Voltage adapter	100662
Breaking roller for side winching, chromated	4.04.0227
Lifting truck, thrust bearing	BB2587
Divisible passenger car grill halves, chromated	BB4806
A pair of bulb holders, low, chromated	3.04.0128
A pair of bulb holders, tall, chromed	3.04.0126
Tow bar, DIN 40/40, placed in auxiliary frame, chromated	BB4170
Shovel, skewer, broom and suspension hooks for chain, etc., placed on front trunk
Safety chain, 2 pcs.	I-GG-GG-7/8-8-18

OTHER

BB 9035
BB 9142

• When the entire superstructure is finally completed and painted, the final assembly is done
• Duomatic, if chassis prepared for this
• Weighing and inspection in Sweden

CHASSIS

BB 9014

Ceiling arch

BB 9045

Top arch
 

BB 9046

Front guard off road
 

BB 9052

Front weight
A front weight is the most efficient way to obtain maximum lifting capacity with a high permissible front axle load.
The chassis design and the availability of suitable attachment points often limit the size of the weight to approx. 750 kg.

BB 9086

Maneuvering from cab (outriggers)

BB 9056

Moving thoughts

FLAKES

BB 9062

Light ramp, adjustable

BB 9123

Cabinet compartment, left front trunk

BB 9124

Cabinet compartment, right front trunk

BB 9125

Fixed front stem (not possible with upper floor)

BB 9126

Stainless front stem

BB 9134

Grid front stem

BB 9148

Net shelf

BB 9149

Upstairs 8 ton in combination with BB 9138

AGGREGATE

BB 9043

Tow bar attachment on folding boom

BB 9102

Tow beam for trailer coupling

BB 9103

Tiltable needle tip

BB 9145

Fold and extend boom, 1x600 with tilt

STORAGE AREA OUTSIDE

BB 9002

Pneumatic central locking

BB 9012

Bar Rule Lock

BB 9048

Central locking electric

BB 9167

Stainless steel cabinets

STORAGE SPACE INSIDE

BB 9081

Air winch, 1/2", 15 m For connection to the recovered vehicle's compressed air system or alternatively for air tools. An air winch with automatic cable rewind, 15 m, 1/2" hose. The air winder is mounted at the back of the cabinet and the cable is routed through the rear body cabinet.

BB 9082

Hose reel for oxygen/acetylene

BB 9083

Cable reel Cable reel with 25 m cable for hanging sign. Installation at the back of a cabinet.

BB 9093

Cabinet heatingA heating package, heated by the engine cooling water, is mounted in the front part of the body cabinet, one on each side. The built-in electric fan circulates the hot air, ventilation holes in the cabinet.

BB 9161

Drawers in cupboards

BB 9177

Tool panel, door or wall

BB 9179

Balcony box

BB 9184

Extra hook row

WINDSCREEN

BB 9127

Hydraulic side shift winch

BB 9173

Winch frame H100PF 12.5 tons

BB 9059

Sepson 6 ton front winch, H60P

• Built-in front winch, 6 ton capacity, including cable control, 5 m cable.

Specification

The length of the rope	30 m
The diameter of the line	14mm
Line speed, innermost lap	10 m/min
Line speed, outermost lap	16 m/min

BB 9127

Hydraulically side-displaceable winch

ELECTRICAL SYSTEM

BB 9054

Flash lights, a pair of LED, switch in cab.

BB 9094

Light sign 1740mm

BB 9084

Extra light, set of 4 pcs. 4 pcs. extra light. Power switch in cab.

BB 9089

LED work light. Power switch in cab.

BB 9095

Extra rotating warning lightRotating warning light, 2 pcs. lamps. Power switch in cab.

BB 9163

Work lights extra, one (1) pair

BB 9165

Rearview camera with 7" screen, 2 visor cameras and 2 cables.

RADIO CONTROL

BB 9007

Teleradio, 20 channels

BB 9073

Radio control, proportional Linus Radio control with 12 proportional control channels and 4 on/off channels. Allows control of 6 hydraulic and 4 electrical functions.

BB 9185

Radio control, proportional Linus 8 – 16+4

HYDRAULIC SYSTEM

BB 9063

Hydraulic pump double

BB 9075

Hydraulic outlet The hydraulic outlet is mounted on the rear trunk of the cabinets, on the same side as the hydraulic package. NOTE - before connecting, check which oil the external hydraulics has - standard in our hydraulic system is mineral oil.

• Pressure and return connection with ¾” quick connectors.
• Pressure 175 bar. Built-in overflow valve.
• The hydraulic outlet is connected to the control unit

BB 9092

Engine PTO, mounting kit

BB 9108

Hydraul pump-variable-75 lit

BB 9109

Hydraul pump-variable-120 lit

BB 9129

Maneuver package left side

PAINTING

BB 9164

Painting, superstructure

BB 9098

Painting, color additive aggregate

BB 9100

Painting, front weight / front winch

BB 9101

Painting, full cab clearcoating

BB 9131

Polished stainless edge lines

BB 9143

Polished stainless edge lines

BB 9151

Painting, color addition cabinets

BB 9155

Painting, cabin color supplement

BB 9156

Painting, the entire cabin, one color

BB 9157

Painting, plastic cabin details

BB 9158

Painting, striping front

BB 9159

Painting, striping at the back

Painting, side/roof air deflectors

BB 9189

Painting, hub, per pc.

Other

BB 9085

Faucet assembly

BB 9106

Post-assembly Installation of equipment after inspection.