Drucken E-Mail

Technical information

ST 42

Lifting capacity
1,5 ton
Lifting height, approx.
0,4-0,5 m

 

Loading capacity platform
4 ton

 

Weight recovery unit
2,5 ton

ST 41 is a platform unit mainly intended for easy platform and grill towing and for quick and easy transports. Its construction is in accordance with our Scandinavian rules and regulations. This type of recovery unit is for those who need a somewhat smaller unit where economy, flexibility and quickness are characteristics. It is a combination of ”easy recovery unit” and flexible transporter of vehicles.


CHASSIS

Suitable chassis should have 8-15 ton total weight, wheel base minimum 4,4 m. Air suspension and low section tyres for better loading angle. PTO for direct mounted pump. High speed approx. 1:1. The chassis should be supplied with side protection bar.


PLATFORM

BB 9111
The ribbed platform construction is at rear somewhat slanted (spoiler pocket) for minimum approach angle. The platform has straight moulding. The platform surface (steel sheeted) is made of extra high tensile steel and has anti skid. The platform is hydraulically slideable for easy on- and off-loading of vehicles. Controlled drainage of the platform. The platform (steel sheeted) is anti-corrosive treated.
  • Platform width 2,45 m
  • Length at wheel base 4,4 m, approx. 6,0m
  • The platform sliding is performed by a hydraulic cylinder
  • Fittings for tyre winches at 0,9 m intervals
  • Guide roller socket at the rear of the platform
  • Two stop blocks
  • Guide roller incl. holder
  • Revolving snatch block with holder
  • Low front wall

SUB FRAME AND TIP FRAME

Sub frame and tip frame are made of VKR profile of extra high tensile steel, which is hot dip galvanized for corrosion resistance. The recovery unit is mounted on the chassis according to the instructions of the truck manufacturer.


RECOVERY UNIT

The recovery unit is made of extra high tensile steel, which is galvanized to be corrosionresistant It has single extension, total extendible length is 1,3 m, lifting capacity in the outer position is 1 500 kg. Hydraulic operation from the control panel. Integrated grid halves for passenger cars and 50 mm tow ball are included.


COMPARTMENTS

A tool compartment of thermosetting plastic (1,0 x 0,4 x 0,46 m) on the left hand side.


WINCHES

A planetary gear winch is mounted on the platform, max pulling capacity 3,6 ton. Guide rollers close to the rope drum. Pneumatic free spooling of the wire. Wire diameter is 10 mm, length 24 m. At the winch a 50 mm tow ball is mounted.


ELECTRICAL SYSTEM

All electrical wires are protected against external effect by wire protection norm. This means that the electrical wires have the same type of protective cover as those of the truck manufacturer. The system’s fuses and relays are placed in the cabin. Two marker lights at each side and electrical emergency stop.
  • Four working lights, two at the front wall and two at rear
  • Back lights, position same as the original position at the chassis
  • Two working lights, recessed
  • Illuminated number plate at left rear
  • Lights in the compartment at the control panel

HYDRAULIC SYSTEM

  • Hydraulic tank with return filter, tank volume is approx. 38 l
  • Hydraulic oil pipes, zinc coated
  • Suction and return hose with wrapped up steel spiral
  • High pressure hoses with pressed air couplings and two steel insertions
  • Hydraulic piston pump driven from PTO, with emergency stop function
  • Directional control valve with five sections connected in parallel, placed to the right
  • The control valve has check valves and main relief valve
  • The levers are provided with spring return
  • Manometer, glycerine damped for control of hydraulic pressure

MISCELLANEOUS

  • Rear wings of rigid plastic with mud flaps.
  • Spade, broom including holder
  • Three pairs of tie down ratchet with hook
  • CE-marking
  • Front wall and rod are painted in the same colour as the cabin
  • Grid in front wall if the cabin has rear window
  • Weighing and loading chart
  • Mineral oil

BASIC UNITS

ST 200
ST 41 Steel platform basic units 8-9 tons chassis
AL 200
AL41 Aluminium basic units 8-9 tons chassis
ST 201
ST 41 Steel platform basic units 10-12 tons chassis
AL 201
AL41 Aluminium basic units 10-12 tons chassis
ST 202
ST 41 Steel platform basic units >12 tons chassis
AL 202
AL41 Aluminium basic units >12 tons chassis
ST 250
ST 41B Overdeck steel platform basic units >14 tons chassis
AL 250
AL41B Overdeck aluminium basic units >12 tons chassis
ST 252
ST 41B Overdeck steel platform basic units >14 tons chassis
AL 252
AL41B Overdeck aluminium basic units >14 tons chassis
ST 450
ST 81 Steel platform basic units >15 tons chassis

CHASSIS

20.130
Adjustable light bar 1.5 m with air
2000.510
Body sides, aluminium

PLATFORM

10.10
Platform width 2.55 m
20.08
Platform extension, every 100 mm
20.127
High front wall (by law Sweden) incl. two red width marking lights
20.129
Net shelf under platform
2000.2206
Motorcycle holder
2000.991
Motorcycle holder on lift unit
300.51
Platform galvanized
40.28
Platform even
40.56
Platform galvanized by blowing

RECOVERY UNIT

20.123
Crane extension 1.6 m – 2 ton
20.124
Stiff legs in combination with 20.123
2000.09
One bin for oil decontamination (1)
2000.25
Two spare cans (2) with holders
2000.26
Spare wheel holder
300.10
Frame for trailer coupling
500.081
Snatch block inside compartment
500.19
Tow bar with holder
800.011
Telescopic stiff legs (left/right)
800.011A
Stiff leg plates removable
800.06
Recovery unit 2,5 ton
800.13
Recovery unit 2,5 ton double extension

COMPARTMENTS

34.11.0005
Air reel 3/8 Zecain compartment
20000.01
Jack
22000.02
Compartment space for above jack
21000.114
Stainless steel compartment 1.2 x 0.6 x 0.5
21000.56
Stainless steel compartment 1.4 x 0.5 x 0.5
21000.57
Stainless steel compartment 1.0 x 0.5 x 0.5
21000.570
Stainless steel compartment 1.0 x 0.65 x 0.5
21000.60
Stainless steel compartment 1.0 x 0.6 x 0.55
21000.69
Stainless steel compartment 1.2 x 0.5 x 0.5
21000.84
Stainless steel compartment 0.8 x 0.5 x 0.5
21000.840
Stainless steel compartment 0.8 x 0.55 x 0.5

WINCHES

200.18
3.6 ton winch mounted onto liftboom
200.181
3.6 ton winch frame mounted
200.182
6.0 ton winch frame mounted
200.21
Guideroller frame mounted winch
200.25
Hydraulically slideable platform winch
200.301
Winch engagement after free spooling via radio

ELECTRICAL SYSTEM

600.07
Back and turn lights onto frontwall
600.052
Start cable set, 12/24 V
600.055
Start cable set 12/24 V, placed in compartment
600.10
Light in one compartment
600.16
One extra working light
600.341
Vision Alert Multiwave 1.8 m
600.342
Vision Alert 1.5 m
600.344
Vision Alert 1.8 m
600.436
Electro servo on hydraulic
6000.301
Flash lights, one pair, front of the cab
6000.500
Rear lights original, one pair frontwall
6000.501
Rear lights original, one pair mounting
6000.502
12 V trailer connection, cable pulling
6000.503
Illuminated number plate, front wall
6000.504
Circulation fan, relay box
851.03
Flash lights, one pair, built-in
Trailer connection 24 volt

HYDRAULIC SYSTEM

2000.29
Control valve left side

MISCELLANEOUS

BB 9035
Transport cost

 

25